IGene Labserve Private Limited

UV PCR WORKSTATION FOR ACONTAMINATION FREE WORK AREA : Quickly inactivate DNA and RNA between experiments with UV. 

Maintain a clean environment with stainless steel 304 chamber.
Customize sizes available other than standards.

With HEPA (High Efficiency Particulate Air) lterationsystem to circulate sterilized Air

Fully Microprocessor Controlled for,Blower Sash,& UV

Multiple Size options as per user requirement

Dual stage  lteration with pre lter and HEPA  lter for contamination free sterilized air

Stainless Steel chamber & work platform for easy cleaning and contamination free area.

Acrylic panel with pulley wheel / Hinged Mechanism blocks UVbelow 400nm

Built in 2 power outlet for operating equipment inside the compartment

Low noise high efficiency blower for proper air Low

Microprocessor controller for blower UV and FL light

Shelves on backside for placement of small equipment

UV Shuts off and blower on after warm up automatically afterdoor opens

Description
A PCR workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminantsTypes PCR Cabinet It is the most used type of PCR Cabinetworking area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface 
Construction
These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest the market today. 
There are 4 Complete Stainless Steel 304 / 316

Inner Stainless Steel, Outer Mild SteelStainless Steel bench, rest mild SteelStainless Steel bench, wooden Body
Air Filtration
The efficiency of a PCR workstation depends upon the quality of pre filters and HEPA filters.In our LAF, the Air filtration system is created to work efficiently even in critical environment. Pre filter that we use are box type pleated having efficiency 95% down to 5 micron and made of HDPE + Non The HEPA filters are of high quality having efficiency 99.99 % down to 0.3 micron and fitted in aluminium anodized case. The blower assembly has one fourth HP; 1400 RPM branded motor and has aluminium anodized impellers.

Description

A PCR workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 laboratory is to create particle and bacteria free working environment to carry out specialize  work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants

Types

PCR Cabinet

It is the most used type of PCR Cabinet. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria.

Construction

These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest bench in the market today. There are 4 different MOC used.

Complete Stainless Steel 304 / 316Inner Stainless Steel, Outer Mild SteelStainless Steel bench, rest mild SteelStainless Steel bench, wooden Body

Air Filtration

The efficiency of a PCR workstation depends upon the quality of pre filters and HEPA filters. In our LAF, the Air filtration system is created to work efficiently even in critical environment. Pre filter that we use are box type pleated having efficiency 95% down to 5 micron and made of HDPE + Non-woven + HDPE mesh media and fitted in aluminium case. The HEPA filters are of high quality having efficiency 99.99 % down to 0.3 micron and fittedin aluminium anodized case. The blower assembly has ¼ HP; 1400 RPM branded motor andhas aluminium anodized impellers. The working area is carefully designed for comfortable working and easy cleaning. The  workbench is made of stainless steel. Standard fittings are air / gas cock and electrical outlet. For illumination, we use fluorescent lamps  Front side of working area is covered by manual sliding door (sash), which is made of transparent acrylic plastic. There are some optional features that can be added if required by customer. LCD display for air velocity, time and lamp on/off status are displayed on it. Germicidal UV lamp extra electrical socket and Magnehelic gauge are also fitted if required.
Germicidal UV lamp

UV lamp is an added option which is used to sterilize working area prior use. It is advised nocontact to made in chamber during this time.

We are ISO and CE certified pcrmanufacturers and suppliers in India. Our company designs both types of horizontal and vertical pcrbenches for laboratory uses that meet pcrbenches for laboratory uses that meet 100) standards. These units are ruggedly constructed for years of worry free operation and made with stainless steel sheet (304 / 316) or powder coated mild steel or GI sheets.

Description

A PCR workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 laboratory is to create particle and bacteria free working environment to carry out specializedwork. As these units discharge air towards user, they provide no personal protection butproduct protection from room contaminantsTypes
PCR CabinetIt is the most used type of PCR Cabinetworking area through HEPA filter fitted on top of the cabinet. Thus, air flows downward(vertically) towards work surface andConstructionThese cabinets are ergonomically designed to provide long service life. Only thick metalsheets and pipes are used in construction so that you may get the finest and safestthe market today. There are 4Complete Stainless Steel 304 / 316Inner Stainless Steel, Outer Mild SteelStainless Steel bench, rest mild SteelStainless Steel bench, wooden BodyAir FiltrationThe efficiency of a PCR workstation depends upon the quality of pre filters and HEPA filters.In our LAF, the Air filtration system is created to work efficiently even in criticalenvironment. Pre filter that we use are box type pleated having efficiency 95% down to 5micron and made of HDPE + Non The HEPA filters are of high quality having efficiency 99.99 % down to 0.3 micron and fitted in aluminium anodized case. The blower assembly has ¼ HP; 1400 RPM branded motor and has aluminium anodized impellers. 4 m/s to 0.6 m/s. The purpose of using such workstations in m Cabinet. In vertical flow cabinet, room air is entered inleaves the cabinet sweeping out particles and bacteria.different MOC used. Non-woven + HDPE mesh media and fitted in aluminium case. 

The working area is carefully designed for comfortable working and easy cleaning. Theworkbench is made of stainless steel. Standard fittings are air / gas cock and electrical outlet.For illumination, we use fluorescent lampsliding door (sash), which is made of transparent acrylic plastic.There are some optional features that can be added if required by customer. LCD display forair velocity, time and lamp on/off status areelectrical socket and Magnehelic Germicidal UV lampUV lamp is an added option which is used to sterilize working area prior use. It is advised nocontact to made in chamber during this time.We are ISO and CE certifiedboth types of horizontal and vertical100) standards. These units are ruggedly constructed formade with stainless steel sheet (304 / 316) or powder coated mild steel or GI sheetsTechnical SpecificationsAir flow directionAir cleanliness Construction

Air flow direction Sash (front door) Side panels Air velocity Illumination lamps. Front side of working area is covered by manual displayed on it. Germicidal UV lamp gauge are also fitted if required.

Description
A laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flowvelocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specializedwork. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants
Types
Vertical Laminar Air flow It is the most used type of laminar air flow. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria. Horizontal Laminar Air Flow
In horizontal air flow cabinet, room air is entered in working area through HEPA filter fitted on the back side of the cabinet. Filtered air flows horizontally towards the user creating sterileworking environment.
Construction
These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Laminar bench in the market today. There are 4 different MOC used.
Complete Stainless Steel 304 / 316Inner Stainless Steel, Outer Mild SteelStainless Steel bench, rest mild SteelStainless Steel bench, wooden Body