Chemical Lab Instruments

Description : Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct.

iGene Labserve fume hood systems meet ASHRAE standards and can withstand any type of acid exposure. Standard units are made in 2ft, 4ft, 5ft, 6ft and 8ft width with variety of construction options as mentioned below. We also design laboratory fume hoods for Hydrofluoric and Perchloric acids on demand.

Technical Specifications :   Work top:Jet black granite
Illumination Fluorescent tube light
Blower Centrifugal exhaust blower (direct drive motor)
Standard fittings:Water tap/Sink with drainage system/Electrical sockets

Optional: FRP coating on inner walls 
                Scrubber system 
                Storage cabinet
                Air foil
                Air Flow Monitor
                Temperature indicator.

Description : Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct.

iGene Labserve fume hood systems meet ASHRAE standards and can withstand any type of acid exposure. Standard units are made in 2ft, 4ft, 5ft, 6ft and 8ft width with variety of construction options as mentioned below. We also design laboratory fume hoods for Hydrofluoric and Perchloric acids on demand.

Work top SS 304 / Jet black granite
Illumination Fluorescent tube light  
Blower Centrifugal exhaust blower (direct drive motor)
Standard fittings : Water tap/Sink with drainage system/Electrical sockets.

Optional : FRP coating on inner walls
Air foil
Scrubber system
Storage cabinet
Temperature indicator

Description :  Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct.

iGene Labserve fume hood systems meet ASHRAE standards and can withstand any type of acid exposure. Standard units are made in 2ft, 4ft, 5ft, 6ft and 8ft width with variety of construction options as mentioned below. We also design laboratory fume hoods for Hydrofluoric and Perchloric acids on demand.

Working Chamber :  Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304 / 316) which is further coated with FRP layer if needed. The standard sizes of chamber are 2ft, 3ft, 4ft, 5ft, 6ft and 8ft etc.

External Surface : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest fume hood. There are three different MOC used.

Technical Specifications :
 Illumination Fluorescent tube light 
Blower Centrifugal exhaust blower (direct drive motor)
Standard fittings: Water tap/Sink with drainage system /Electrical sockets.
Optional : FRP coating on inner walls 
                 Scrubber system
                 Storage cabinet
                 Air Flow Monitor

Description :   Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct.

iGene Labserve fume hood systems meet ASHRAE standards and can withstand any type of acid exposure. Standard units are made in 2ft, 4ft, 5ft, 6ft and 8ft width with variety of construction options as mentioned below. We also design laboratory fume hoods for Hydrofluoric and Perchloric acids on demand.

Working Chamber :  Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304 / 316) which is further coated with FRP layer if needed. The standard sizes of chamber are 2ft, 3ft, 4ft, 5ft, 6ft and 8ft etc.

Technical Specifications : Jet black granite 
Illumination Fluorescent tube light
Blower Centrifugal exhaust blower (direct drive motor)
Standard fittings : Water tap/Sink with drainage system/Electrical sockets .
Optional :  FRP coating on inner walls/Air foil/Scrubber system

Description : Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct.

iGene Labserve fume hood systems meet ASHRAE standards and can withstand any type of acid exposure. Standard units are made in 2ft, 4ft, 5ft, 6ft and 8ft width with variety of construction options as mentioned below. We also design laboratory fume hoods for Hydrofluoric and Perchloric acids on demand.

Working Chamber : Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304 / 316) which is further coated with FRP layer if needed. The standard sizes of chamber are 2ft, 3ft, 4ft, 5ft, 6ft and 8ft etc.

External Surface : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest fume hood. There are three different MOC used.

Illumination Fluorescent tube light 
Blower Centrifugal exhaust blower (direct drive motor) 
Standard fittings : Water tap/Sink with drainage system/Electrical sockets.
Optional : FRP coating on inner walls
Storage cabinet
Scrubber system

  

Description : Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct.

iGene Labserve fume hood systems meet ASHRAE standards and can withstand any type of acid exposure. Standard units are made in 2ft, 4ft, 5ft, 6ft and 8ft width with variety of construction options as mentioned below. We also design laboratory fume hoods for Hydrofluoric and Perchloric acids on demand.

Working Chamber : Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304 / 316) which is further coated with FRP layer if needed. The standard sizes of chamber are 2ft, 3ft, 4ft, 5ft, 6ft and 8ft etc.

External Surface : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest fume hood. There are three different MOC used.

Service Valves :  As per user requirement, service valves can be customized for wet and dry service i.e raw water, nitrogen gas, air etc.

Electrical Utilities :  As per user requirement, 2 or 4 or 6 electrical sockets can be fitted with the fume hood 6A/15A connections.

Sash : Glass window mechanism with counter balanced weight is used for up and down movement of door. Sash track is a system made of weights and a pulley. Operator can easily move sash up or down and keep at desired height during work.

Chemical Storage Cabinet : Ventilated cabinets are provided for chemical storage at the bottom in multiple formats. Lockable wheels are also provided for users on demand. 

Certifications :  Our fume hoods are designed in accordance with required quality certifications such as ASHRAE110 - 1995 and EN-14175- 2003.

Technical Specifications :  Work top : Jet black granite
Illumination Fluorescent tube light
Blower Centrifugal exhaust blower (direct drive motor)
Standard fittings: Water tap/Sink with drainage system/Electrical sockets.
Optional : FRP coating on inner walls/Scrubber system.

Description:Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to remove smoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct. iGene Labserve fume hood systems meet ASHRAE standards and can withstand any type of acid exposure. Standard units are made in 2ft, 4ft, 5ft, 6ft and 8ft width with variety of construction options as mentioned below. We also design laboratory fume hoods for Hydrofluoric and Perchloric acids on demand. 
Working Chamber : Inner working chamber or area is the most important part of fume hood which remains in direct contact of fumes, acids and different types of chemicals. We make inner chamber walls of stainless steel (304 / 316) which is further coated with FRP layer if needed. The standard sizes of chamber are 2ft, 3ft, 4ft, 5ft, 6ft and 8ft etc.
External Surface : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest fume hood. There are three different MOC used. Complete Stainless Steel 304 Galvanized Mild Steel Powder Coated Stainless Steel 316

Service Valves : As per user requirement, service valves can be customized for wet and dry service i.e raw water, nitrogen gas, air etc. 
 
Electrical Utilities : As per user requirement, 2 or 4 or 6 electrical sockets can be fitted with the fume hood 6A/15A connections.  

Sash : Glass window mechanism with counter balanced weight is used for up and down movement of door. Sash track is a system made of weights and a pulley. Operator can easily move sash up or down and keep at desired height during work.

Chemical Storage Cabinet : Ventilated cabinets are provided for chemical storage at the bottom in multiple formats. Lockable wheels are also provided for users on demand. 

Certifications: Our fume hoods are designed in accordance with required quality certifications such as ASHRAE110 - 1995 and EN-14175- 2003

IQ OQ PQ certificates , Onsite NABL Validation available as per requirement

Illumination Fluorescent tube light
Blower Centrifugal exhaust blower
Standard fittings:Water tap.

Fume Hood is an enclosure which is used to remove fumes and air borne particles at the contamination source. It is a kind of fume ventilation system which prime work is to removesmoke, dust mist and chemical fumes and restrict their entry into laboratory environment. A laboratory fume hood comprises of metallic sheet enclosure, steel or marble stone work bench, service fixture and electrical points. For fume exhaust, heavy duty blowers are fitted and remotely connected to the duct.

Technical Specifications : 

Inner chamber : SS 304 / 316
Exterior : Power coated MS / Stainless Steel / GI
Work top : SS 304 / Jet black granite
Illumination : Fluorescent tube light
Blower : Centrifugal exhaust blower
Standard fittings : Water tap/Sink with drainage system/Electrical sockets.
Optional : FRP coating on inner walls/Air foil/Scrubber system/Storage cabinet/Caster wheels w/ brake/Wet & dry service valves/Air Flow Monitor/Temperature indicator.
Illumination  : Fluorescent tube light
Blower : Centrifugal exhaust blower
Standard fittings: Water tap/Sink with drainage system