IGene Labserve Private Limited

• Variable speed selection - delivers upto 2500 RPM
•  3 way switch (Touch, Continuous & Stand-by mode)
•  Brushless DC motor fitted with ball bearing
•  Orbital diameter of 4 mm
•  Visual indication marker for max speed with attachment
•  IP 21 class protection - suitable for use in hoods

• Continuous and touch operation Adjustable speed ranges from 300 to 4200 rpm.

• Brushless DC motor for maintenance free long time.
• Digital Dual display for speed and time.
• Orbital diameter of 4 mm.
• Built in counter balance for steady and smooth operation.

• Time setting from 1 to 999 minutes & infinite for continuous operation.

• Ideal for microfiltration and quick spin-downs 
• Easy-to-use with dual start/stop function  
• 7200rpm fixed speed  
• Compatible with 2mL × 8 and PCR8 × 2 rotors  
• Quiet running,noise level   45 Db  
• Rotor change without tools  
• Accelerates and brakes in seconds 

• Easy to use, real-time display of all operating information
• Countdown mode support
• DC brushless motor, low noise, small interference, maintenance-free. 
• Opening the cap will automatically stop running. 

•  Fast acceleration from standstill to maximum speed fully in just 10sec. 
• Braking time is short, from the highest speed to a complete standstill in just 4sec

• size : 4 x 2 x 2 Feet : 1219 x 610 x 610Sizes
• Available : 2ft, 3ft, 4ft, 5ft and 6 ft
• Construction : SS 304 /316 
• Powder coated MS or GI sheet
• Controller ON/Off switches for Cabinet, Light & Blower 
• Air filtration HEPA filter 99.99% efficiency
• Air recirculation 70% recirculation and 30% exhaust
• Fumigation In-built fumigation port 
• Noise level Less than 60 decibel
• Standard Fittings Magnehelic pressure gauge /Fluorescent lamp.

• Brushless motor, high torque, free maintenance, no carbon powder pollution, quick acc and dec speed profile. 
• Fluorine free compressors with double cooling cycle with precise temperature control. 
• Microprocessor control, digital /LCD display which indicates the temperature, speed, time, RCF in operation, Quick speed acceleration and deceleration cycle. 
• Running parameter can be edited, very simple to operate. 10 programs can be stored in the memory, 10 kinds of accelerating and decelerating speed for your choice. 
• Automatically electric lid lock, over speed, over temperature protection and imbalance detection and protection. 
• High quality powder coated steel exterior, inner chamber of corrosion resistant stainless steel with built-in explosion-proof sleeve of 3 tiers protection makes it extremely safe and reliable. 
• Simple and quick loading of rotor without any direction mark through specialized taper sleeve to spindle. 
• High quality dampers for best centrifugal results 

DESCRIPTION

The iGene white light transilluminator is a very cost-effective product for viewing colorimetric/protein gels and other colorimetric samples that require a white light transilluminator. It is very compact, convenient and safe to use. Its light source is LED and the lifetime bulb expectancy is 50,000 hours and power consumption are very low. It carries a one-year warranty.
FEATURE

Model No. : WH-400

Viewing area : 20x20cm

Tube : 6

Light Source: LED

Housing : Anti Corrosion treated with Powder coated Mild Steel

Safety Shield : Clear Transparent lid for excellent clarity

Input : 8 Watt

Weight (kg): 1.3

Warranty 1 year

Standard Features:

Bacteriological Incubator Shaker is used for storage and bacterial culture growth at 37°C. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient+10°C to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

iGene Labserve  bacteriological incubators Shaker  feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.

Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

• Triple drive mechanism connected with the shaking tray for robust and balanced shaking to use for long duration.
• Easy cleaning with front drain in port to easily drain off accidental spills Easy to move with optional stand with wheels.
• Flexible platform to accommodate varieties of clamps and flasks, also available with sticky mat for universal use.
• Flexible screwing options to fix clamps and holders for test tubes at platform at desired positions.
• Small unit height is less than 2.5 feet allows it to use below the working bench for space saving in small labs.
• Models available with cooling as standard, non-cooling eco versions are also available on demand.
• Suitable for microbial cultures. Viewing window with light switch to observe during operation  

• 50°C to 250°C temperature
• Uniform air circulation across chamber
• Digital temperature controller cum indicator
• Excellent uniformity at high temperature
• Stainless steel 304 grade inner chamber
• Corrosion resistant exterior
• Fume ventilation points on both sides
• Stainless steel cable trays
• Over temperature protection.

• External cabinet
• Glass wool insulation
• Inner chamber
• Tubular air heaters
• Motor driven blower
• Temperature sensor
• Tray slots
• PID temperature controller
• Load indicator
• Mains on/off switch
• Safety thermostat

  TECHNICAL SPECIFICATIONS : 

•    UV source : 302 & 365nm (254nm Optional)
•    Viewing Surface (mm) : 210DX260W
•    Weight (Kg) : 4.3
•    UV Tube :11xT5 8W (365nm x 6 & 302nm x5)UV Blocking                     Cover     
• UltraSafe UV Blocking Cover: Block 99.99% UV                                                                  Transmittance  

•  UV Safety Shield : Clear Transparent lid for excellent                                                  clarity.  
•   Input : 220V AC,50-60HZ.  
•   Fuse : 2.5AmpAnti Slip rubber foot provided for base

• Blue light prevents users easily exposed parts from uv damage. It’s also no damage for DNA fragments.

• With 108 pieces of LED light, long life and strong illumination. Suitable for observation of large range of fluorochrome.
• High luminance, high sensitivity and good homogeneity.
• It can be used individually as blue light platform while it can also be used matching up multiImager.
• Uniform transillumination blue-ray module. Screen plate fixed at random.
• Angle adjustable, Single hand can operate, which makes it’s more easily watch gel.
• Compared with the traditional uv transmission instrument: uniform transillumination blue-ray module, sample observation more symmetrical and photo’s effect is better.
• Long-term energy conservation and environmental protection. Perfect observation with full size transparent optical filter.

• Safe operation, no need to wear safety glasses or other protection device. We use different dyes such as EtBr, SYBR Safe, SYBR Gold, SYBR Green I & II, SYPRO Ruby, SYPRO Orange, Coomassie Fluor™ Orange stains, GelGreen, GelRed and Lumitein™ Protein Gel Stain.

• Type A2: recirculate approximately 70% air and 30% exhaust
• Type B1: recirculate approximately 30% air and 70% exhaust
• Type B2: Does not recirculate but exhaust 100% air

• Complete Stainless Steel 304 / 316
• Inner Stainless Steel,Outer Mild Steel
• Stainless Steel bench, rest mild Steel 

Standard Features:

BOD Incubator is used for storage and fugal / bacterial culture growth at 37C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20C) to 60C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

 iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.

Description

A PCR workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants

PCR Cabinet

It is the most used type of PCR Cabinet. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria.

• FEATURES & BENEFITS
• Stainless steel interior
• Digital temperature indicator
• Digital temperature Controller
• ISI marked flange / immersion heating elements
• Up to 121°C temperature range
• Silicone rubber gasket
• Automatic pressure control switch
• Stainless steel basket
• Reliable steam pressure gauges
• Double or triple walled construction
• Pedal for lid opening
• Water level indicator
• Water inlet & outlet valves

• iG-H-PRO+ MAGNETIC STIRRER : Brushless DC motor is maintenance free and explosion-proof.Digital temperature control with max. temperature at 340°C.Digital speed control with max. speed up to 1500rpm.Max. stirring quantity of H2O at 20L.Safety circuits provide overheating protection.The “HOT” warning will flash if the plate temperature is above 50°C even when the hotplate is turned off.
• High-resolution LCD display shows actual temperatures and speed (MS-H-ProT displays the time also).
• External temperature control is possible by connecting the temperature sensor(PT 1000) with accuracy at ±0.2°C.
• Stainless steel work plate with ceramic coating provides good chemical-resistant performance.
• Remote function provides PC control and data transmission.