Microbiology Equipment

IG-MS-H-Pro+  Hot Plate Magnetic Stirrer : 
Calibration  :Automatic Calibration 
Display Option/Output Read out Option : Digital 
Timer Setting (Increment step) (sec) : 60 
Minimum Speed Possible (RPM) : 100
Controler type :Microprocessor Controlled

IG-Micro-Plate Incubator Shaker:
Integrate incubator and shaker. Save laboratory space.Rational and compact designed, good temperature uniformity, low noisy.Micro-processor controls temperature and shaking speed. Timing function built in.Design of Human-machine interface and operation panel. Cover can be wide-angle opened, convenient to watch and fetch the sample.Built-in cover switch. When the cover is open, air circulation, heating and shaking will automatically stop. No temperature overshoot problem.Unique speed control circuit to ensure shaker smooth starting and avoid liquid spilling.Speed of the circulation fan is adjustable to avoid high-speed of the circulation fan making the sample volatilizing.Independent temperature alarm system. Heating is cut off when temperature over the limited value.Alarm when program completes.Brushless DC motor, long life and maintenance free.

IG-Loop Sterilizer :

• Based on the principle of infrared, products are widely used in loop or inoculating needle sterilization, completely replace the alcohol lamp.
• The temperature of heating hole can reach 800, sterilization only takes 5-7 seconds, thorough sterilization. Products can be used in anaerobic chamber.
• Small volume, light weight, appearance and easy to clean. Heating body can adjust angle, easy operation.
• Organic substances in the ceramic funnel pipe depths ashing prevent infectious spatter and cross contamination.
• Precise temperature control technology, avoid the heating components work overload, long life.

TECHANICAL SPECIFICATION
Center Max.                   Temp.825
Low Level Temp.             480
Heating Speed                20min (to max. temp.)
Max. Sterilize Diameter    35mm
Heating Element Length   100mm
Adjustable Angle              75°~120°
Voltage                           AC 220V / AC 110V, 50/60Hz
Power                             400W
Fuse                               250V, 3A/5A,  5x20
Dimension (WxDxH)         92 x 101 x 170mm.
Net Weight                       1.1kg

• Port of Dispatch: DELHI

Specifications : Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.

Types :  There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory.

Type A2: recirculate approximately 70% air and 30% exhaust

Construction : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today.

Complete Stainless Steel 304 / 316

Air Circulation :  In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.97% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type A2 safety cabinets. These air filters are of reputed brands in the market, economical in price and easy replaceable. ISO 5 / Class 100 quality, supply and exhaust through HEPA filters are done. Inflow velocity remains approx. 105 fpm (0.5 m/sec), while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and 30% exhaust.

Technical Specifications :  
Sizes Available 2ft, 3ft, 4ft, 5ft and 6 ft
Construction SS 304 /316 / Powder coated MS or GI sheet
Work top SS 304 /316
Controller ON/Off switches for Cabinet, Light & Blower
Air filtration HEPA filter 99.99% efficiency
Air recirculation 70% recirculation and 30% exhaust
Fumigation In-built fumigation port
Noise level Less than 60 decibel
Standard Fittings : Magnehelic pressure gauge/Fluorescent lamp/UV light.

IG-Water Bath Shaker :Unique and novel appearance, small size, powerful functions. All surfaces in contact with water are made of high-quality stainless steel and are corrosion-resistant.TFT LCD holographic displays operating speed, temperature, time. Graphic dynamic symbols and precise data at a glance.Built-in chip memory storage mode, memory 9 kinds commonly used combination of parameters, and can achieve single-node cycle or multi-node pulse cycle. To meet more experimental requirements.Using microcomputer program PID automatic temperature control, with a good temperature uniformity, high temperature control accuracy, safety and comprehensive protection features.Oscillation and heating using split design, the moving frame can be taken out when it does not do not need to oscillation, canbe usedas a constant temperature water bath box, a dual-purpose machine.DC motor, low noise, maintenance-free, long service life.transparent clamshell design, easy to operate, real-time observation of the internal operating status.
Technical Specifications:Heating capacity 10L.Temp. Control Range R.T.+5 ~  Temp.Stability 100 ±0.5 Oscillation mode Reciprocating.Oscillation range 0~26mm.Speed range 20~200rpm.Sink size((W×D×H) 250x304x200mm.Voltage AC220/110V, 50/60Hz.Power 1100W.Dimensions(W×D×H) 288 x 506 x 350 mm.Net weight 10kgs

DESCRIPTION
Bacteriological Incubator is used for storage and bacterial culture growth at 37°C. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient+10°C to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

iGene Labserve bacteriological incubators feature rugged construction.
External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger andthermal printer etc.
TECHANICAL SPECIFICATION
Temperature range : Ambient to 70°C
Temperature accuracy  : ±0.2°C 37°C
Temperature controller : Dual display PID controller/Display SV & PV.
Temperature sensor :  PT100

Standard Features : 
BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.

Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

TECHNICAL SPECIFICATIONS :  
Temperature range Ambient-20°C to 60°C
Temperature accuracy ±0.2°C 37°C
Temperature controller:Dual display PID controller/Display SV & PV/Auto tuning feature.
Temperature sensor PT100
Inner chamber SS 304
External cabinet Powder coated GI sheet
Insulation Glass wool
Door : Insulated door/Mechanical latch / clamp/Glass window.
Heaters Resistance wire heaters
Shelves SS wire mesh (removable)
Air circulation Motorized blower / Axial fan
Standard fittings: Mains on/off switch/Load Indicator/Fan on/off switch.
Power supply : 220 Volts 50Hz.
Optional : GMP construction (Inner & outer SS 304)
PLC + HMI controller w/ USB interface
21 CFR Part 11 software
Data logger w/ USB interface
Thermal printer
Inner chamber LED light.

DESCRIPTION
IG-Cooling Incubator Shaker shaking incubator:Bacteriological Incubator is used for storage and bacterial culture growth at 37°C. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient+10°C to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is
responsible for uniform distribution of temperature across the chamber.

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there
is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

IGene Labserve bacteriological incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete
stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make
these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc

DESCRIPTION
IG-ISC Series incubator shakers are available with options to select from multiple sizes. All models are having cooling and non-cooling variants. Our models are reliable, versatile and space saving and very affordable. The simplest and design and ease of operation make our incubator shaker highly efficient for microbial culturing. 
FEATURES

• Triple drive mechanism connected with the shaking tray for robust and balanced shaking to use for long duration.
• Easy cleaning with front drain in port to easily drain off accidental spills Easy to move with optional stand with wheels.
• Flexible platform to accommodate varieties of clamps and flasks, also available with sticky mat for universal use.
• Flexible screwing options to fix clamps and holders for test tubes at platform at desired positions

• Production Capacity: 50 per month

IG-  Multi-Tube Vortexer:Maximum process 50 samples at the same time to make the experiment more convenient and efficient.Microprocessor control, simplistic designed appearance, LED display the speed and time.Humanized program design, built-in short mix and timing operation modes. Operation stable and silent.Large orbital vortex, performance effective. Various types of foam tube frames and pads for option.

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: DELHI

DESCRIPTION
Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom User has to press the pedal and lift the lid.
We make various types of vertical autoclave machinesEconomy models come with powder coated MS exterior and stainless steelinterior. Our Deluxe models are double walled vertical autoclaves andmade with inner and exterior both of stainless steel; while the TripleWalled models have another chamber and all three walls are made of thickgauge of stainless steel sheets.sterilizer following ASME guidelines in order to ensure that they are safefor users and samples.

FEATURES & BENEFITS

1. Stainless steel interior.
2. Digital temperature indicator.
3. Digital temperature Controller.
4. ISI marked flange / immersion heating elementsUp to 121°C. temperature range.
5. Silicone rubber gasket.
6. Automatic pressure control switch.
7. Stainless steel basket.
8. Reliable steam pressure gauges.
9. Double or triple walled construction.
10. Pedal for lid opening.
11. Water level indicatorWater inlet & outlet valves.

• Delivery Time: 1 week
• Packaging Details: Wooden Packing

Microplate Shaker :LED digital display. Simple and easy operation designed panel. Display time and speed accurately.Microprocessor controls speed and time, safe, stable, no noise.Accommodate 4 standard PCR plates or micro plates, mixing trace amount of sample efficiently.DC brushless motor, long life and free of maintenance. Provide both gentle and powerful shaking.Provide timing function. Alarm notification when program completes.

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: DELHI
• Delivery Time: 4-6 weeks

Specifications : Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.

Types : There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types:
Type A2: recirculate approximately 70% air and 30% exhaust
Type B1: recirculate approximately 30% air and 70% exhaust
Type B2: Does not recirculate but exhaust 100% air.

Construction : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today. There are three different MOC used.
Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel

Air Circulation : In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.97% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type A2 safety cabinets. These air filters are of reputed brands in the market, economical in price and easy replaceable. ISO 5 / Class 100 quality, supply and exhaust through HEPA filters are done. Inflow velocity remains approx. 105 fpm (0.5 m/sec), while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and 30% exhaust.

Standard Accessories : Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. An hour meter is connected to UV lamp. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand.

Sizes Available : 2ft, 3ft, 4ft, 5ft and 6 ft
Construction SS 304 /316 / Powder coated MS or GI sheet
Work top SS 304 /316
Controller ON/Off switches for Cabinet, Light & Blower
Air filtration HEPA filter 99.99% efficiency
Air recirculation 70% recirculation and 30% exhaust
Fumigation In-built fumigation port
Noise level Less than 60 decibel
Standard Fittings: Magnehelic pressure gauge/Fluorescent lamp/UV light.

Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial andcultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom. Uselid.We make various types of vertical autoclave machinesEconomy models come with powder coated MS exterior and stainless steelinterior. Our Deluxe models are double walled vertical autoclaves andmade with inner and exterior both of stainless steel; while the TripleWalled models have another chamber and all three walls are made of thickgauge of stainless steel sheets.sterilizer following ASME guidelines in order to ensure that they are safefor users and samples.

FEATURES & BENEFITSStainless steel interiorDigital temperature indicatorDigital temperature ControllerISI marked flange / immersion heating elementsUp to 121°C temperature rangeSilicone rubber gasketAutomatic pressure control switchStainless steel basketReliable steam pressure gaugesDouble or triple walled constructionPedal for lid openingWater level indicatorWater inlet & outlet valves

• Production Capacity: 5
• Delivery Time: 1 week
• Packaging Details: Wooden

Standard Features:

BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber. Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if thereis any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.
iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energyefficient. Refrigerant used in this system is free of CFC.In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.
Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

• Delivery Time: 3-4 weeks

IG-Autoclave Vertical :Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom. User has to press the pedal and lift the lid.

We make various types of vertical autoclave machines as per intended use. Economy models come with powder coated MS exterior and stainless steel interior. Our Deluxe models are double walled vertical autoclaves and made with inner and exterior both of stainless steel; while the Triple Walled models have another chamber and all three walls are made of thick gauge of stainless steel sheets. We make every vertical steam sterilizer following ASME guidelines in order to ensure that they are safe for users and samples.

FEATURES :  

Stainless steel interior 
Digital temperature indicator
Digital temperature Controller 
ISI marked flange / immersion heating elements
Up to 121°C temperature range
Silicone rubber gasket
Automatic pressure control switch
Stainless steel basket
Reliable steam pressure gauges
Double or triple walled construction
Pedal for lid opening
Water level indicator
Water inlet & outlet valves.

TECHNICAL SPECIFICATIONS : 

Construction : Economy Model/Double Walled Model/Triple Walled Model.
Interior SS 304 with silicon gasket
Working Pressure 15 to 20 psi 
Working Temp. 121°C to 125°C
Controller Auto set to 15psi & 121°C
Pressure display Analogue dial gauge
Timer: Digital timer
Power supply 220 Volts 50Hz
Standard Fittings : Low water indicator; Automatic pressure switch; Pedal lifting device Steam release valve; Water outlet valve; Spring loaded safety valve Power cable with three pin top

 

FEATURES : Cylindrical / Rectangular design
Stainless steel interior and exterior
ISI marked flange / immersion heating elements
Working pressure 15 psi to 20 psi
Standard temperature 121°C
Silicon rubber door gasket
Digital Temperature controller
Digital Timer and alarm (buzzer)
Automatic pressure control switch
Reliable steam pressure gauges
Vacuum breaker and steam trap valve
Brass safety valves
Viewing glass water level check
Triple walled construction
Automatic water level cut-off
Powder coated / chrome plated MS Stand.

TECHNICAL SPECIFICATIONS :  Construction Triple Walled
Inner chamber SS 304 with full argon welding
External chamber SS 304
Finishing Mirror finished inner and external surface
Insulation Glass wool
Working temperature : 121°C
Working pressure 15 to 20 psi
Controller type : PID temperature controller/Digital timer controller with END cycle buzzer.
Heaters ISI mark immersion heaters
Pressure Automatic : pressure control switch/Analog dial type pressure gauge.

Our horizontal autoclave units are made of stainless steel to ensure corrosion resistance surface. Tipple walled construction ensures excellent level of safety. Boiler is fitted separately and connected to the chamber. Water level indicator is also attached to the boiler. Automatic low water cut-off is optional and fitted on demand only. Each unit is fitted with automatic pressure control switch; it is capable to manage pressure between 5 psi to 20 psi with accuracy of ±1 psi. User can easily set the desired temperature with the help of digital controller fitted on the front side of the unit. In order to achieve trustable tight sealing of door, we always use neoprene rubber gasket. In order to make our horizontal autoclave well suited to your application and to make your work easier, we offer a range of optional accessories. HMI control option is also available

 

Before supplying to customer, our horizontal autoclaves are tested up to 30 psi pressure along with other parameters such as leakage, power control, temperature control, safety valves and important parts of the machine. Our stringent quality control process ensures our customers that they are buying finest quality products.

FEATURES & BENEFITS

• Delivery Time: 3-4 weeks

IG-Rocking Shaker :Rocking Shakerlatform made of stainless steel and natural rubber, which is alkali-resistant, non-deformation, easy-clean and spill-prevention.Speed real-time display and diminishing time display.The bearing is articulated rotating, secure and no wear, suitable for prolonged use.Compact designed, take up very little space.Brushless DC motor, maintenance-free.

Standard Features :  There are some laboratory applications that require shaking under a constant low temperature; therefore, we bring to you shaking incubators that combine incubator and orbital shaker under one cabinet. Such machines feature all the facilities of a refrigerated incubator along with one orbital shaker fitted inside. Each unit is fitted with digital temperature controller, shaking speed controller and digital indicator for RPM.Our bacterial Incubator Shakers offer excellent temperature uniformity and smooth orbital shaking. The machine is easy to use and maintain. Made of corrosion free steel sheets and rugged design, these units offer excellent performance year after year.

TECHNICAL SPECIFICATIONS 

Temperature Range Ambient-20°C to 60°C
Environment Cooling (CFC free Refrigeration) 
Shaking Speed 30 to 300 rpm (±2 rpm)
Orbital Motion Diameter : 25 mm
Shaking movement Orbital
RPM Display LED Display
RPM Controller Speed regulator
Exterior Powder Coated GI Sheet
Interior Stainless Steel 304
Air circulation Motor driven blower
Heater Tubular air heaters
Temperature controller :Microprocessor PID controller Display of SV & PV
Optional : Digital timer 0 – 99 minutes
                Temperature Low / High alarm.
                

A laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants 
Types :  Vertical Laminar Air flow
Horizontal Laminar Air Flow
IQ OQ PQ Certificates,Onsite NABL Validation available as per requirement.
Air cleanliness  : Class 100
Illumination : Fluorescent or LED light
Noise level :  65 ±5 db
Power supply  : 220 volts / 50 Hz

Description : A laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants.
Types 
Vertical Laminar Air flow: It is the most used type of laminar air flow. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria.

Horizontal Laminar Air Flow :  In horizontal air flow cabinet, room air is entered in working area through HEPA filter fitted on the back side of the cabinet. Filtered air flows horizontally towards the user creating sterile working environment.

Construction: These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Laminar bench in the market today. There are 4 different MOC used.

Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel
Stainless Steel bench, wooden Body 

Air Filteration : The efficiency of a Laminar Air Flow workstation depends upon the quality of pre filters and HEPA filters. In our LAF, the Air filtration system is created to work efficiently even in critical environment. Pre filter that we use are box type pleated having efficiency 95% down to 5 micron and made of HDPE + Non-woven + HDPE mesh media and fitted in aluminium case. The HEPA filters are of high quality having efficiency 99.99 % down to 0.3 micron and fitted in aluminium anodized case. The blower assembly has ¼ HP; 1400 RPM branded motor and has aluminium anodized impellers.

The working area is carefully designed for comfortable working and easy cleaning. The workbench is made of stainless steel. Standard fittings are air / gas cock and electrical outlet. For illumination, we use fluorescent lamps. Front side of working area is covered by manual sliding door (sash), which is made of transparent acrylic plastic.

There are some optional features that can be added if required by customer. LCD display for air velocity, time and lamp on/off status are displayed on it. Germicidal UV lamp, extra electrical socket and magnahelic gauge are also fitted if required.

Germicidal UV lamp :  UV lamp is an added option which is used to sterilize working area prior use. It is advised no contact to made in chamber during this time.

We are ISO and CE certified laminar air flow manufacturers and suppliers in India. Our company designs both types of horizontal and vertical laminar flow benches for laboratory uses that meet ISO (class 100) standards. These units are ruggedly constructed for years of worry free operation and made with stainless steel sheet (304 / 316) or powder coated mild steel or GI sheets.

Technical Specifications 

 Air flow direction Vertical
 Air cleanliness Class 100
Construction SS / Powder coated MS / GI sheet/ wooden
Air velocity 0.45 m/s to 0.65 m/s
Illumination Fluorescent or LED light
Noise level 65 ±5 db
Power supply 220 volts / 50 Hz
Air filtration : Pre-Filter - 10 microns (washable)/HEPA filter (0.3 Microns).
Standard fittings : Air / gas cock, Mains on/off switch, Light on/off switch/UV Light on/off switch, Blower on/off switch

BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.
Temperature range Ambient-20°C to 60°C,
Temperature accuracy ±0.2°C @37°C
Temperature controller Dual display PID controller/Display SV & PV Auto tuning feature.
Temperature sensor PT100
Inner chamber SS 304
External cabinet Powder coated GI sheet
Insulation Glass wool
Heaters Resistance wire heaters
Shelves SS wire mesh 
Air circulation Motorized blower / Axial fan
Standard fittings Mains on/off switch/Load Indicator/Fan on/off switch.

FEATURES & BENEFITS

• Cylindrical / Rectangular design
• Stainless steel interior and exterior
• ISI marked flange / immersion heating elements
• Working pressure 15 psi to 20 psi
• Standard temperature 121°C
• Silicon rubber door gasket
• Digital Temperature controller
• Digital Timer and alarm (buzzer)
• Automatic pressure control switch
• Reliable steam pressure gauges
• Vacuum breaker and steam trap valve

Brass safety valves Viewing glass water level check Triple walled construction Automatic water level cut-off Powder coated / chrome plated MS Stand A double door autoclave is fixed between two adjacent rooms. In such autoclaves, operator at one side puts samples inside the chamber and initiates sterilization process, after completion of sterilization, buzzer beeps and operator at other side, opens the door and removes the sterilized samples. Also known as pass through autoclaves, these sterilizers are especially used in cleanroom areas and where contaminant applications are prime requisite
Our horizontal autoclave units are made of stainless steel to ensure corrosion resistance surface.Tipple walled construction ensures excellent level of safety. Boiler is fitted separately and connected to the chamber. Water level indicator is also attached to the boiler. Automatic low water cut-off is optional and fitted on demand only. Each unit is fitted with automatic pressure control switch; it is capable to manage pressure between 5 psi to 20 psi with accuracy of ±1 psi.
User can easily set the desired temperature with the help of digital controller fitted on the front side of the unit. In order to achieve trustable tight sealing of door, we always use neoprene rubber gasket. In order to make our horizontal autoclave well suited to your application and to make your work easier, we offer a range of optional accessories.
HMI (Touch Screen Panel) control option is also available.
OPTIONAL FEATURES & ACCESSORIES

• Working at 30 psi with 134°C
• PLC with HMI interface
• Complete SS 316 construction
• Doors at both sides
• Provision for vacuum drying
• Data logger with USB interface

Before supplying to customer, our horizontal autoclaves are tested up to 30 psi pressure along with other parameters such as leakage, power control, temperature control, safety valves and important parts of the machine. Note: in order to fix / install a double door autoclave, little alteration or modification in current location (place where autoclave to be installed) is required.

• Delivery Time: 4-5 Weeks

Digital Magnetic Stirrer Hot Plate : shell, firm and durable, thermo stability and anti-corrosion.Special heating technique, the heating plate can reach temperature up to 340°C.

• PID for temperature control. Two display windows. High precision measurement. Single button operation. Inner and outer PT1000 for thermometry.
• Available for heating and stirring standard/non-standard reaction flasks from 50ml to 1000ml.

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: DELHI
• Delivery Time: 4-6 weeks

Vacuum Ovens are used for drying heat sensitive materials such as powder to extract moisture. As vacuum drying lowers the boiling point; therefore, losses of compounds other than water are minimized. Samples are dried under gentle heating leaving almost no residue. Some applications of vacuum oven include moisture content determination, dry sterilization, and purification and out gassing of solids etc.

FEATURES : 

We design vacuum oven in rectangular, square chamber and round chamber as required and as per the capacity required.

Leakage proof arc welding

Silicon gasket for high temperature performance and high quality door clamps.

Temperature range of Ambient to 150ºC (Optional 200ºC) with PID Controller and dual display of SV and PV supported with PT-100 sensor.

Optionally available with data logging, digital timer, PLC based HMI controller, vacuum display, digital vacuum controller etc. as per user requirement.

TECHNICAL SPECIFICATIONS : Chamber design Round and Rectangular
Vacuum range Up to -760 mmHg
Temperature range Ambient+5°C to 150°C (Optional 200ºC)
Temperature sensor PT100
Temperature controller:Digital PID controller/Display of SV & PV.
Inner chamber Hermetically welded stainless steel 304 sheet
External cabinet Powder coated GI sheet
Door Solid door with clamp & toughened glass window
Shelves Removable SS shelves
Standard fittings:Mains on/off switch/Vacuum pump on/off switch/Electric socket for vacuum pump.
Power supply:220 Volts 50Hz

Description :  laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants.

Types  

Vertical Laminar Air flow : It is the most used type of laminar air flow. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria.

Horizontal Laminar Air Flow : In horizontal air flow cabinet, room air is entered in working area through HEPA filter fitted on the back side of the cabinet. Filtered air flows horizontally towards the user creating sterile working environment.

Construction :  These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Laminar bench in the market today. There are 4 different MOC used.
Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel
Stainless Steel bench, wooden Body

Air Filteration : The efficiency of a Laminar Air Flow workstation depends upon the quality of pre filters and HEPA filters. In our LAF, the Air filtration system is created to work efficiently even in critical environment. Pre filter that we use are box type pleated having efficiency 95% down to 5 micron and made of HDPE + Non-woven + HDPE mesh media and fitted in aluminium case. The HEPA filters are of high quality having efficiency 99.99 % down to 0.3 micron and fitted in aluminium anodized case. The blower assembly has ¼ HP; 1400 RPM branded motor and has aluminium anodized impellers.

The working area is carefully designed for comfortable working and easy cleaning. The workbench is made of stainless steel. Standard fittings are air / gas cock and electrical outlet. For illumination, we use fluorescent lamps. Front side of working area is covered by manual sliding door (sash), which is made of transparent acrylic plastic.

There are some optional features that can be added if required by customer. LCD display for air velocity, time and lamp on/off status are displayed on it. Germicidal UV lamp, extra electrical socket and magnahelic gauge are also fitted if required.

Germicidal UV lamp :  UV lamp is an added option which is used to sterilize working area prior use. It is advised no contact to made in chamber during this time.

We are ISO and CE certified laminar air flow manufacturers and suppliers in India. Our company designs both types of horizontal and vertical laminar flow benches for laboratory uses that meet ISO (class 100) standards. These units are ruggedly constructed for years of worry free operation and made with stainless steel sheet (304 / 316) or powder coated mild steel or GI sheets.

Technical Specifications : Air flow direction Vertical and Horizontal
Air cleanliness Class 100
Construction SS / Powder coated MS / GI sheet/ wooden
Air flow direction Vertical / Horizontal
Air velocity 0.45 m/s to 0.65 m/s
Illumination Fluorescent or LED light
Noise level 65 ±5 db
Power supply 220 volts / 50 Hz
Air filtration Pre-Filter - 10 microns (washable)/HEPA filter (0.3 Microns).
Optional : UV Germicidal lamp

laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flowvelocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specializedwork. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants.

Horizontal Laminar Air Flow : In horizontal air flow cabinet, room air is entered in working area through HEPA filter fittedon the back side of the cabinet. Filtered air flows horizontally towards the user creating sterile working environment.

Construction : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Laminar bench in the market today. There are 4 different MOC used.
Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel
Stainless Steel bench, wooden Body

Air Filteration : The efficiency of a Laminar Air Flow workstation depends upon the quality of pre filters and HEPA filters. In our LAF, the Air filtration system is created to work efficiently even in critical environment. Pre filter that we use are box type pleated having efficiency 95% down to   and made of HDPE + Non-woven + HDPE mesh media and fitted in aluminium case. The HEPA filters are of high quality having efficiency 99.99 % down to    and fitted in aluminium anodized case. The blower assembly has  HP; 1400 RPM branded motor and has aluminium anodized impellers.

The working area is carefully designed for comfortable working and easy cleaning. The workbench is made of stainless steel. Standard fittings are air / gas cock and electrical outlet. For illumination, we use fluorescent lamps. Front side of working area is covered by manual sliding door (sash), which is made of transparent acrylic plastic.
There are some optional features that can be added if required by customer. LCD display for air velocity, time and lamp on/off status are displayed on it. Germicidal UV lamp, extra electrical socket and magnahelic gauge are also fitted if required.

Germicidal UV lamp

UV lamp is an added option which is used to sterilize working area prior use. It is advised no contact to made in chamber during this time. 

We are ISO and CE certified laminar air flow manufacturers and suppliers in India. Our company designs both types of horizontal and vertical laminar flow benches for laboratory uses that meet ISO (class 100) standards. These units are ruggedly constructed for years of worry free operation and made with stainless steel sheet (304 / 316) or powder coated mild steel or GI sheets.

Technical Specifications : Air flow direction:Horizontal
Air cleanliness Class 100
Construction SS / Powder coated MS / GI sheet/ wooden
Sash (front door) Manual sliding type (Acrylic transparent)
Side panels Acrylic / polycarbonate / SS
Air velocity 0.45 m/s to 0.65 m/s
Illumination Fluorescent or LED light
Noise level 65 5 db
Power supply 220 volts / 50 Hz
Air filtration :  )
Standard fittings : Air / gas cock, Mains on/off switch, Light on/off switch/UV Light on/off switch, Blower on/off switch.