Microbiology Products

Specifications : Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection

Types :   There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types:

1. Type B2: Does not recirculate but exhaust 100% air

Construction : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today.
There are three different MOC used.

• Complete Stainless Steel 304 / 316
• Inner Stainless Steel, Outer Mild Steel
• Stainless Steel bench, rest mild Steel

Air Circulation : In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.97% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type A2 safety cabinets. These air filters are of reputed brands in the market, economical in price and easy replaceable. ISO 5 / Class 100 quality, supply and exhaust through HEPA filters are done. Inflow velocity remains approx. 105 fpm (0.5 m/sec), while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and 30% exhaust.

Standard Accessories : Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. An hour meter is connected to UV lamp. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand

We also manufacturer biosafety cabinets class 2 type B1 and B2

Technical Specifications :  

• Sizes Available 2ft, 3ft, 4ft, 5ft and 6 ft
• Construction SS 304 /316 / Powder coated MS or GI sheet
• Work top SS 304 /316
• Controller ON/Off switches for Cabinet, Light & Blower
• Air filtration HEPA filter 99.99% efficiency
• Air recirculation 70% recirculation and 30% exhaust
• Fumigation In-built fumigation port
• Noise level Less than 60 decibel
• Standard Fittings : Magnehelic pressure gauge/Fluorescent lamp/UV light.

Optional :

• Microprocessor based controller system
• UV hour meter
• Calibration certificates

IQ OQ PQ Certificates,onsite NABL Validation available as per requirment.

DESCRIPTION
iGene  operating temperature range of these ovens are 200°C, 250°C and 300°C, which is controlled through microprocessor based PID controller, which displays both set value (SV) and process value (PV) and plays important role in temperature control. Forced air circulation is maintained using branded motor driven blower system. For heating, we use ceramic bead heating elements or tubular air heaters for high temperature. Each unit is fitted with over temperature protection device (safety thermostat), which keeps your oven safe in case of controller failure.
FEATURES
Temperature range : Ambient +5°C to 250°C (Optional300ºC)
Temperature accuracy : ±1°C
Temperature sensor  : PT100
Temperature controller : Microprocessor PID controller/Display of SV & PV

Standard Features :
 BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below.
These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to 60°C.
These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.

Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

TECHNICAL SPECIFICATIONS :

Temperature range Ambient-20°C to 60°C
Temperature accuracy ±0.2°C @37°C
Temperature controller:Dual display PID controller/Display SV & PV/Auto tuning feature.
Temperature sensor PT100
Inner chamber SS 304 
External cabinet Powder coated GI sheet 
Insulation Glass wool 
Heaters Resistance wire heaters
Shelves SS wire mesh (removable)
Air circulation Motorized blower / Axial fan
Standard fittings:Mains on/off switch/Load Indicator/Fan on/off switch.
Power supply:220 Volts 50Hz.

IG-Micro-plate Shaker Incubator :

• LCD display, set and actual temperature display simultaneously, time and shaking speed.
• User friendly touch operation interface, the streamlined fuselage, beautiful appearance, convenient cleaning.
• Two-side heating of micro plates that allows achieving exact correspondence of the set and actual temperature in wells of the micro plates.
• The microprocessor controls the time and temperature, good linearity, temperature oscillation speed accuracy, small fluctuation.
• Can configure 4 standard microtiter plates and plates, alarm signal after operation ends.
• Power restore function, equipment can restore to operate as the original set automatically.
• DC brushless motor drive, long service life, free of maintenance

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: DELHI

DESCRIPTION
iGene Maximum operating temperature range of these ovens are 200°C, 250°C and 300°C, which is controlled through microprocessor based PID controller, which displays bothset value (SV) and process value (PV) and plays important role in temperature control.Forced air circulation is maintained using branded motor driven blower system. For heating,we use ceramic bead heating elements or tubular air heaters for high temperature. Each unit is fitted with over temperature protection device (safety thermostat), which keeps your ovensafe in case of controller failure.

TECHNICAL SPECIFICATIONS:
Temperature range: Ambient +5°C to 250°C (Optional300ºC)
Temperature accuracy: ±1°C
Temperature sensor:PT100
Temperature controller:    Microprocessor PID controller/Display of SV & PV

FEATURES : 
50°C to 250°C temperature
Uniform air circulation across chamber
Digital temperature controller cum indicator
Excellent uniformity at high temperature
Stainless steel 304 grade inner chamber
Corrosion resistant exterior
Stainless steel cable trays.
Over temperature protection

CO2/O2 Incubators :
Air Jacket which is good for temperature uniformity 192x64 Graphics LCD Display for better legibility16 BIT MCPID controller applied Non-dispersion dual beam infrared sensor/ TC Sensors applied Round corner design for contamination prevention and easier cleanup Multi-functioning alarm unit and thermal cut-element applied Aesthetically designed for easier door opening by using the side of the device Less gas leaking due to the special packing Possible to control gas concentration precisely without overshoot and undershoot.

• Port of Dispatch: DELHI
• Delivery Time: 4-6 weeks

IG-Multi-Tube Vortexer:IGENE Multi-Tube Vortexer is with technique of brushless DC motor and microprocessor controlled technique. Unique knob operation is easy to use. It can maximum process 50 samples at once. A variety of test tube foams can be selected to meet the mixing needs of different test tubes. It can be widely used in the biotechnology, microbiology, medical analysis and other industries.

Features:

• Easy to operate with one-touch knob.
• 1min~99h59min time range, automatic warning sound when finish working.
• A variety of test tube foam racks for option to meet the mixing needs of different test tubes.
• Soft start, uniform acceleration, effectively avoids samples splashing.
• Brushless DC motor: precise shaking speed, long service life maintenance-free.
• Process up to 50 samples at a time to make the experiment more convenient and efficient.
• Microprocessor control, simple operation panel, LED displays for speed and time.
• Humanized program design, built-in short mix and timing operation modes

Speed range :500~2500rpm Orbit :  4mm Temp setting range : 1min ~99h59min Power supply  : 70W Voltage :  AC110~240V 50/60Hz Dimension(mm) : 410x276x432
Weight  : 20kg.

IG-MUFFLE FURNACES :
Max temperature- 1000°C 1400°C
Continuous operating temp.- 900°C 1300°C
Heating element- Kanthal wire Silicon carbide (SiC) rods
Thermocouple - K Type R Type
Chamber MOC Ceramic fibre board Ceramic Zirconium boardExterior MOC-Mild steel powder coated Mild steel powder coatedInsulation- Ceramic fibre blanket Ceramic fibre blanket

Specifications : Biosafety Cabinets are specialized workstations widely used in pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection.

Types : There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types

Type A2: recirculate approximately 70% air and 30% exhaust
Type B1: recirculate approximately 30% air and 70% exhaust
Type B2: Does not recirculate but exhaust 100% air.

Construction : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today. There are three different MOC used.

Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel

Air Circulation :  In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.97% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type A2 safety cabinets. These air filters are of reputed brands in the market, economical in price and easy replaceable. ISO 5 / Class 100 quality, supply and exhaust through HEPA filters are done. Inflow velocity remains approx. 105 fpm (0.5 m/sec), while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and 30% exhaust.

Technical Specifications :  

Sizes Available 2ft, 3ft, 4ft, 5ft and 6 ft
Construction SS 304 /316 / Powder coated MS or GI sheet
Work top SS 304 /316
Controller ON/Off switches for Cabinet, Light & Blower
Air filtration HEPA filter 99.99% efficiency
Air recirculation 70% recirculation and 30% exhaust
Fumigation In-built fumigation port
Noise level Less than 60 decibel
Standard Fittings : Magnehelic pressure gauge/Fluorescent lamp/UV light.
Optional: Microprocessor based controller system/UV hour meter

Specifications :  Biosafety Cabinets are specialized workstations widely used in clinical, pharmaceutical, life science and industrial laboratories where experiments need highly contaminant free environment. Also known as biological safety cabinets and biohazard safety cabinets, these are made in three different class types such as Class 1, Class 2 and Class 3; in which Class 2 is widely used in microbiology laboratories because it provides protection to both product as well as personal. It is biosafety level factor which decides which BSC should be used in laboratory. These cabinets are considered safer than other clean benches because such BSCs effectively eliminate risks to operator / staff, samples and the environment from pathogenic biological agents (PBA) and microorganisms responsible for spreading airborne infection. Types There are three types of class 2 biosafety cabinets are made. It is the type of work which decides which class 2 BSC should be used in laboratory. Below is short description about all types: Type A2: recirculate approximately 70% air and 30% exhaust Type B1: recirculate approximately 30% air and 70% exhaust Type B2: Does not recirculate but exhaust 100% air Construction These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Biosafety Cabinet in the market today. There are three different MOC used. Complete Stainless Steel 304 / 316 Inner Stainless Steel, Outer Mild Steel Stainless Steel bench, rest mild Steel.Air Circulation In order to minimize spread of airborne bacterial and viral organisms, the use of filter is crucial; therefore, we use 99.97% efficiency HEPA filters for particle size 0.3 microns in our biological class 2 type A2 safety cabinets. These air filters are of reputed brands in the market, economical in price and easy replaceable. ISO 5 / Class 100 quality, supply and exhaust through HEPA filters are done. Inflow velocity remains approx. 105 fpm (0.5 m/sec), while down flow velocity remains approx. 55 fpm (0.3 m/sec). 70 % air is re-circulated and 30% exhaust. Standard Accessories Our Biosafety cabinets are fitted with fluorescent lights outside working zone. UV lamps are fitted inside working zone in such a way that the operator cannot see them directly. An hour meter is connected to UV lamp. Electrical sockets are fitted to run any instrument under the working area; in addition, service fixtures for air, gas, vacuum and water are fitted on demand.

We also manufacturer biosafety cabinets class 2 type B1 and B2
Technical Specifications :Sizes Available 2ft, 3ft, 4ft, 5ft and 6 ft.Construction SS 304 /316 / Powder coated MS or GI sheet.Work top SS 304 /316.Controller ON/Off switches for Cabinet, Light & Blower.Air filtration HEPA filter 99.99% efficiency.Air recirculation 70% recirculation and 30% exhaust.Fumigation In-built fumigation port.Noise level Less than 60 decibel.Standard Fittings Magnehelic pressure gauge Fluorescent lamp UV light.
Sizes Available 2ft, 3ft, 4ft, 5ft and 6 ft
Construction SS 304 /316 / Powder coated MS or GI sheet
Work top SS 304
Controller ON/Off switches for Cabinet, Light & Blower
Air filtration HEPA filter 99.99% efficiency
Air recirculation 70% recirculation and 30% exhaust
Fumigation In-built fumigation port
Noise level Less than 60 decibel
Standard Fittings : Magnehelic pressure gauge/Fluorescent lamp/UV light

Standard Features
Bacteriological Incubator is used for storage and bacterial culture growth at 37°C. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient to 70°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.  

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly. 

iGene Labserve bacteriological incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient.

 In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.

Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

TECHNICAL SPECIFICATIONS

• Temperature range :     Ambient to 70°C
• Temperature accuracy: ±0.2°C @37°C
• Temperature controller: Dual display PID controller Display SV   & PV Auto tuning feature .
• Temperature sensor:      PT100
• Inner chamber :            SS 304
• External cabinet:           Powder coated GI sheet
• Insulation:                    Glass wool Door,Insulated door Mechanical latch / clamp Glass window
• Heaters: Resistance wire heaters (Air Fin Heaters optional) Shelves :SS wire mesh (removable)/ Shelves with holes for small instruments.
• Air circulation :Motorized blower / Axial fan Standard   fittings,Mains on/off switch  Load Indicator Fan on/off switch
• Power supply :220 Volts 50Hz

• Delivery Time: 2 Weeks
• Packaging Details: Wooden Packing

Standard Features : Designed smart and light. Can operate in one hand

Speed adjustable, digital display speed. Speed precisely controlled to avoid splashing.

Suitable for homogeneous dispersion of a small amount of sample in small container

High quality stainless steel dispersing head, anti-corrosion, high temperature resistance for disinfecting

Easy to take off the dispersing head for cleaning.

High speed and high efficiency motor, long life.

Optional H-type stand, height and angle can be adjusted, convenient to take and store

Technical Specifications : 

Speed Range 8krpm~35Krpm(1krpmIncrement)
Rotor Line Speed 6.3m/sec~14m/sec
Working Noise 72dB 
Voltage AC 220V,50Hz
Power Input/output 160W/110W
Dimension(WxDxH) 46x55x230mm.

Standard Features:

Bacteriological Incubator is used for storage and bacterial culture growth at 37DegreeC. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient to 70DegreeC. These units arefitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.
Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly. iGene Labserve bacteriological incubators feature rugged construction.
External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient.
In long term experience, we have noted that different users have different needs;therefore, we understand the need of customization. In order to meet theirdiverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.
Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

• Delivery Time: 3-4 weeks

A laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flowvelocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specializedwork. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants.

Air flow direction Vertical 
Air cleanliness Class 100
Illumination Fluorescent or LED light
Noise level 65 5 db
Power supply 220 volts / 50 Hz
Air filtration Pre-Filter  10 microns (washable) HEPA filter (0.3 Microns).
Standard fittings : Air / gas cock, Mains on/off switch, Light on/off switch UV Light on/off switch, Blower on/off switch

Standard Features:
 BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.

Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.

TECHNICAL SPECIFICATIONS : 

Temperature range Ambient-20°C to 60°C
Temperature accuracy ±0.2°C @37°C
Temperature controller:Dual display PID controller/Display SV & PV/Auto tuning feature.
Temperature sensor PT100
Inner chamber SS 304
External cabinet Powder coated GI sheet
Insulation Glass wool
Door: Insulated door/Mechanical latch / clamp/Glass window.
Heaters Resistance wire heaters
Shelves SS wire mesh (removable)
Air circulation Motorized blower / Axial fan
Standard fittings : Mains on/off switch/Load Indicator/Fan on/off switch.
Power supply:220 Volts 50Hz

DESCRIPTION
iGene Maximum operating temperature range of these ovens are 200°C, 250°C and 300°C, which is controlled through microprocessor based PID controller, which displays bothset value (SV) and process value (PV) and plays important role in temperature control.Forced air circulation is maintained using branded motor driven blower system. For heating,we use ceramic bead heating elements or tubular air heaters for high temperature. Each unit is fitted with over temperature protection device (safety thermostat), which keeps your ovensafe in case of controller failure.

FEATURES :  

•  50°C to 250°C temperature
• Uniform air circulation across chamber
• Digital temperature controller cum indicator
• Excellent uniformity at high temperature
• Stainless steel 304 grade inner chamber
• Corrosion resistant exterior
• Fume ventilation points on both sides
• Stainless steel cable trays
• Over temperature protection.

DESCRIPTION
iGene operating temperature range of these ovens are 200°C, 250°C and 300°C, which is controlled through microprocessor based PID controller, which displays both set value (SV) and process value (PV) and plays important role in temperature control. Forced air circulation is maintained using branded motor driven blower system. For heating, we use ceramic bead heating elements or tubular air heaters for high temperature. Each unit is fitted with over temperature protection device (safety thermostat), which keeps your oven safe in case of controller failure.

FEATURES : 50°C to 250°C temperature
Uniform air circulation across chamber
Digital temperature controller cum indicator
Excellent uniformity at high temperature
Stainless steel 304 grade inner chamber
Corrosion resistant exterior 
Fume ventilation points on both sides 
Stainless steel cable trays 
Over temperature protection.

TECHNICAL SPECIFICATIONS : 
Temperature range Ambient +5°C to 250°C (Optional300ºC) 
Temperature accuracy ±1°C
Temperature sensor PT100
Temperature controller:Microprocessor PID controller/Display of SV & PV
Construction Double walled
Inner chamber Stainless steel Mild steel 304
Exterior powder coated 
Insulation Glass Wool 
Shelves SS wire mesh cable trays (removable)
Door Insulated solid door with clamp
Door gasket Synthetic rubber gasket
Air circulation Motor driven blower assembly Vent port 1 or 2 depending upon chamber
Temperature variation and readability/set ability:+ 5ºC
Safety Over temperature protection
Circulation ; Aero dynamic internal design for achieving horizontal air circulation.
  

Standard Features:

Bacteriological Incubator is used for storage and bacterial culture growth at 37DegreeC. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient to 70DegreeC. These units arefitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.
Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.
iGene Labserve bacteriological incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient.
In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.
Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

• Delivery Time: 3-4 weeks

Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom. User has to press the pedal and lift the lid.

We make various types of vertical autoclave machines as per intended use. Economy models come with powder coated MS exterior and stainless steel interior. Our Deluxe models are double walled vertical autoclaves and made with inner and exterior both of stainless steel; while the Triple Walled models have another chamber and all three walls are made of thick gauge of stainless steel sheets. We make every vertical steam sterilizer following ASME guidelines in order to ensure that they are safe for users and samples.

FEATURES : Stainless steel interior
Digital temperature indicator
Digital temperature Controller
ISI marked flange / immersion heating elements
Up to 121°C temperature range
Silicone rubber gasket
Automatic pressure control switch
Stainless steel basket
Reliable steam pressure gauges
Double or triple walled construction
Pedal for lid opening
Water level indicator
Water inlet & outlet valves.

TECHNICAL SPECIFICATIONS :
 Construction:Economy Model/Double Walled Model/Triple Walled Model.
MOC Exterior : Painted MS sheet/SS 304 (mirror finish)/SS 304 mirror finish
No. of walls : Two / Two / Three
Lid  : Polished MS  / SS 304  / SS 304
Interior SS 304 with silicon gasket
Working Pressure 15 to 20 psi
Working Temp. 121°C to 125°C
Controller Auto set to 15psi & 121°C
Pressure display Analogue dial gauge
Timer Mechanical timer
Power supply 220 Volts 50Hz.

DESCRIPTION
Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever(pedal) is attached at the bottom. User has to press the pedal and lift the lid.

FEATURES : Stainless steel interior
Digital temperature indicator
Digital temperature Controller
ISI marked flange / immersion heating elements
Up to 121°C temperature range
Silicone rubber gasket
Automatic pressure control switch
Stainless steel basket
 Double or triple walled construction
Water level indicator.

DESCRIPTION
Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom. User has to press the pedal and lift the lid.

Stainless Steel Vertical Autoclave:Stainless Steel interior.Digital temperature indicator. Digital temperature Controller.Silicone rubber gasjet. Automatic Pressure control Switch.Stainless steel gasket.Double or triple walled construction . water level indicator. water inlet & outlet values

DESCRIPTION : Construction: The overall stability chamber is built on a rigid stainless steel frame. Thick gauge of stainless steel 304 or 316 is used. High density PUF insulation is filled between inner and external chambers. Each chamber is provided with suitable number of steel wire mesh cable trays (removable) 4 to 8 or more.
Temperature & Humidity: The temperature range of our stability test chambers is 10°C to 60°C; while the humidity range is 35% to 95% RH. As per ICH guidelines our chambers are ideal for storage conditions 25°C at 60% RH, 40°C at 75% RH, 30°C at 65% RH and 25°C at 40% RH.
Refrigeration System: For refrigeration, we equip our stability chambers with branded CFC free compressors that are hermetically sealed and feature quiet operation.
Heating: SS tubular air heaters are used to generate warm temperature inside the chamber.
Humidity system: Stainless steel tank and ISI mark immersion heater features automatic water filling and low water safety device.
Air circulation: Air circulation is mandatory function to maintain uniform temperature and humidity across the chamber; therefore, we equip our stability test chambers with motorized blower assembly which features quiet operation and long service life.
Control System: Our stability chambers are equipped with self-programmed PID controllers, which feature set value (SV) and process value (PV). In addition, we also use PLC based HMI controller which is advance system and features colour touch screen, various error display, data logging and data transfer to pen drive or direct printout. We can also program and configure HMI control system as per user demand.
Illumination: Interior illumination is done by LED/fluorescent light which can be supported by cyclic timer if required. It controls the ON/OFF timing of light for a week.
Safety Features: Each stability chamber is equipped with many safety features ensuring you working with a trustable machine. Each chamber is fitted with over temperature protection, over current protection and low and high temperature limits and time delay for compressor switch on etc.
Data logging: We also provide data logging feature with our stability chambers; PC interface with RS485 communication and also 21 CFR part 11 software as an option.
Temperature Range 10°C to 60°C
Temperature accuracy ±1°C
Temperature controller : Microprocessor PID controller/Display of SV & PV/Low / High buzzer.
Humidity Range: 40% to 95% RH 
Humidity accuracy ±3% RH
Humidity controller: Microprocessor PID controller/Display of SV & PV/Low / High buzzer.

Description :  A laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants.

Types 

Vertical Laminar Air flow : It is the most used type of laminar air flow. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria.

Horizontal Laminar Air Flow : In horizontal air flow cabinet, room air is entered in working area through HEPA filter fitted on the back side of the cabinet. Filtered air flows horizontally towards the user creating sterile working environment.

Construction : These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Laminar bench in the market today. There are 4 different MOC used.
Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel
Stainless Steel bench, wooden Body

Air Filteration :  The efficiency of a Laminar Air Flow workstation depends upon the quality of pre filters and HEPA filters. In our LAF, the Air filtration system is created to work efficiently even in critical environment. Pre filter that we use are box type pleated having efficiency 95% down to 5 micron and made of HDPE + Non-woven + HDPE mesh media and fitted in aluminium case. The HEPA filters are of high quality having efficiency 99.99 % down to 0.3 micron and fitted in aluminium anodized case. The blower assembly has ¼ HP; 1400 RPM branded motor and has aluminium anodized impellers.

The working area is carefully designed for comfortable working and easy cleaning. The workbench is made of stainless steel. Standard fittings are air / gas cock and electrical outlet. For illumination, we use fluorescent lamps. Front side of working area is covered by manual sliding door (sash), which is made of transparent acrylic plastic.

There are some optional features that can be added if required by customer. LCD display for air velocity, time and lamp on/off status are displayed on it. Germicidal UV lamp, extra electrical socket and magnahelic gauge are also fitted if required.

Germicidal UV lamp : UV lamp is an added option which is used to sterilize working area prior use. It is advised no contact to made in chamber during this time.

We are ISO and CE certified laminar air flow manufacturers and suppliers in India. Our company designs both types of horizontal and vertical laminar flow benches for laboratory uses that meet ISO (class 100) standards. These units are ruggedly constructed for years of worry free operation and made with stainless steel sheet (304 ) or powder coated mild steel or GI sheets. 
Technical Specifications : Air flow direction Vertical and Horizontal
Air cleanliness Class 100
Construction SS / Powder coated MS / GI sheet/ wooden
Sash (front door) Manual sliding type 
Side panels Acrylic / polycarbonate / SS
Air velocity 0.45 m/s to 0.65 m/s
Illumination Fluorescent or LED light
Noise level 65 ±5 db
Power supply 220 volts /50 Hz

IQ OQ PQ Certificates, onesite NABL Validation available as per requirement.

Standard Features:

BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.
Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC.
In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.
Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

• Delivery Time: 3-4 week
• Packaging Details: Wooden Packing

Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom. User has to press the pedal and lift the lid.

We make various types of vertical autoclave machines as per intended use. Economy models come with powder coated MS exterior and stainless steel interior. Our Deluxe models are double walled vertical autoclaves and made with inner and exterior both of stainless steel; while the Triple Walled models have another chamber and all three walls are made of thick gauge of stainless steel sheets. We make every vertical steam sterilizer following ASME guidelines in order to ensure that they are safe for users and samples.

FEATURES : Stainless steel interior
Digital temperature indicator
Digital temperature Controller
ISI marked flange / immersion heating elements
Up to 121°C temperature range
Silicone rubber gasket
Automatic pressure control switch
Stainless steel basket
Reliable steam pressure gauges
Double or triple walled construction
Pedal for lid opening
Water level indicator
Water inlet & outlet valves.

Standard Features : Bacteriological Incubator is used for storage and bacterial culture growth at 37°C. These laboratory incubators are also known as heated incubators because their temperature range remains between above ambient to 70°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.

 Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if there is any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.

iGene Labserve bacteriological incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted to enhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filled with high density glass wool which minimizes heat loss and keeps the unit energy efficient.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.

Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

TECHNICAL SPECIFICATIONS :  
Temperature range Ambient to 70°C
Temperature accuracy ±0.2°C @37°C
Temperature controller: Dual display PID controller/Display SV & PV/Auto tuning feature .
Temperature sensor PT100
Inner chamber SS 304
External cabinet Powder coated GI sheet
Insulation Glass wool
Door:Insulated door/Mechanical latch / clamp/Glass window.
Heaters Resistance wire heaters (Air Fin Heaters optional) 
Shelves SS wire mesh (removable)/ Shelves with holes for small instruments
Air circulation Motorized blower / Axial fan
Standard fittings : Mains on/off switch/Load Indicator/Fan on/off switch.
Power supply 220 Volts 50Hz.
Optional : GMP construction (Inner & outer SS 304)/PLC + HMI controller w/ USB interface/21 CFR Part 11 software/Data logger w/ USB interface /Thermal printer/Inner chamber LED light.

Standard Features:

BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber. Each unit is equipped with digital PID temperature controller for high temperature accuracy and uniformity. This controller displays both set value (SV) and process value (PV). It also has temperature low / high alarm which alerts operator if thereis any variation in set temperature. Heat is generated using resistance wire heaters or beaded heaters; motorized blower or axial fan is also fitted to distribute the temperature across the chamber evenly.
iGene Lab serve BOD incubators feature rugged construction. External cabinet is made of thick gauge of GI sheet which is powder coated and painted toenhance its corrosion resistance feature or GMP model with complete stainless steel if required. The inner chamber is made of thick gauge of 304 grade stainless steel sheets. The gap between the inner and external chamber is filledwith high density glass wool which minimizes heat loss and keeps the unit energy efficient. Refrigerant used in this system is free of CFC.

In long term experience, we have noted that different users have different needs; therefore, we understand the need of customization. In order to meet their diverse needs we provide several customization options and accessories to make these bacterial incubators fit to their specific requirements. Optional accessories include PLC based HMI controller, 21 CFR part 11 software, data logger and thermal printer etc.
Each unit is tested at various steps before dispatching to customer ensuring you that you are buying a finest incubator.

BOD Incubator is used for storage and fugal / bacterial culture growth at 37°C or below. These laboratory incubators are also known as cooling incubators or BOD Incubator because their temperature range remains between (ambient-20°C) to 60°C. These units are fitted with digital temperature controller and air circulation fan, which is responsible for uniform distribution of temperature across the chamber.
Temperature range Ambient-20°C to 60°C,
 Temperature accuracy ±0.2°C @37°C
Temperature controller Dual display PID controller/Display SV & PV/Auto tuning feature.
Temperature sensor : PT100
Shelves SS wire mesh
Air circulation Motorized blower / Axial fan
Standard fittings : Mains on/off switch
Power supply 220 Volts 50Hz.

DESCRIPTION
Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever(pedal) is attached at the bottom. User has to press the pedal and lift thelid.
We make various types of vertical autoclave machines as per intended use.
Economy models come with powder coated MS exterior and stainless steel interior. Our Deluxe models are double walled vertical autoclaves and made with inner and exterior both of stainless steel; while the Triple Walled models have another chamber and all three walls are made of thick gauge of stainless steel sheets. We make every vertical steamsterilizer following ASME guidelines in order to ensure that they are safe for users and samples.
FEATURES & BENEFITS

• Stainless steel interior
• Digital temperature indicator
• Digital temperature Controller
• ISI marked flange / immersion heating elements
• Up to 121°C temperature range
• Silicone rubber gasket
• Automatic pressure control switch
• Stainless steel basket
• Reliable steam pressure gauges
• Double or triple walled construction
• Pedal for lid opening
• Water level indicator
• Water inlet & outlet valves

• Delivery Time: 3-4 week

Vertical autoclaves are also known as top loading sterilizers that come in cylindrical shape. These are widely used in hospitals, Operation Theatre (OT), microbiology laboratory for sterilization of various medial and cultures. The working of vertical autoclave is simple to understand; to open, a radial locking mechanism is fitted at top of the lid; a foot lever (pedal) is attached at the bottom. User has to press the pedal and lift the lid.

We make various types of vertical autoclave machines as per intended use. Economy models come with powder coated MS exterior and stainless steel interior. Our Deluxe models are double walled vertical autoclaves and made with inner and exterior both of stainless steel; while the Triple Walled models have another chamber and all three walls are made of thick gauge of stainless steel sheets. We make every vertical steam sterilizer following ASME guidelines in order to ensure that they are safe for users and samples.

FEATURES : Stainless steel interior
Digital temperature indicator
Digital temperature Controller
ISI marked flange / immersion heating elements
Up to 121°C temperature range
Silicone rubber gasket
Automatic pressure control switch
Stainless steel basket
Reliable steam pressure gauges
Double or triple walled construction
Pedal for lid opening
Water level indicator
Water inlet & outlet valves.

TECHNICAL SPECIFICATIONS 

Construction : Economy Model/Double Walled Model/Triple Walled Model.
Interior SS 304 with silicon gasket
Working Pressure 15 to 20 psi
Working Temp. 121°C to 125°C
Controller Auto set to 15psi & 121°C
Pressure display Analogue dial gauge
Timer : Digital timer
Power supply 220 Volts 50Hz.

IG-LAMINAR VERTICAL AIR FLOW:Laminar air flow workstation is a closed cabinet fitted with HEPA filtered air flow system with unidirectional constant flow of air with almost no or minimal turbulence. The air flow velocity remains between 0.4 m/s to 0.6 m/s. The purpose of using such workstations in laboratory is to create particle and bacteria free working environment to carry out specialized work. As these units discharge air towards user, they provide no personal protection but product protection from room contaminants.

Types 

Vertical Laminar Air flow :- It is the most used type of laminar air flow. In vertical flow cabinet, room air is entered in working area through HEPA filter fitted on top of the cabinet. Thus, air flows downward (vertically) towards work surface and leaves the cabinet sweeping out particles and bacteria.

Horizontal Laminar Air Flow :-In horizontal air flow cabinet, room air is entered in working area through HEPA filter fitted on the back side of the cabinet. Filtered air flows horizontally towards the user creating sterile working environment.

Construction :-These cabinets are ergonomically designed to provide long service life. Only thick metal sheets and pipes are used in construction so that you may get the finest and safest Laminar bench in the market today. There are 4 different MOC used.
Complete Stainless Steel 304 / 316
Inner Stainless Steel, Outer Mild Steel
Stainless Steel bench, rest mild Steel
Stainless Steel bench, wooden Body